Lime Green Semi Flexible Filament

Uglymonkey Semi Flexible filament for 3D Printers.  High quality locally manufactured filament with a constant diameter.  The filament comes on a plastic spool and is sealed in a plastic bag with desiccant. Each spool is marked with the type of filament and the recommended printing temperature. We have a lot of confidence in the locally manufactured filament we supply, because we use it on a daily basis.

Semi Flexible with a rubber feel. This Product can stretch up to 80% and is ideal for hard rubber parts where a bit of flexibility is required. Due to its  flexibility it requires an extruder capable of handling soft filament. Printed at 50mm/s maximum printing speed.

Specifications:

• Amount: 1Kg Roll / 500 Gram Roll
  
• Colour: Lime Green
  
• Diameter: 1.75mm
• Tollerance: +- 50 Micron
• Spool dimensions: OD = 220mm, ID = 100mm, Width = 80mm
• Recommended printing temperature: 235 Deg C
• Recommended bed temperature: 60-75 Deg C
• Recommended bed preparation: Hairspray, Gluestick (Pritt, UHU etc.) or Kapton tape
• Note: Cooling is recommended and retraction must be disabled or be kept to a minimum amount, not more than 1mm