White PETG 1.75mm

Uglymonkey White PETG filament for 3D Printers. The filament comes on a plastic spool and is sealed in vacuumed plastic bag with desiccant. Each spool is marked with the type of filament and the recommended printing temperature.

Specifications:

• Amount: 1kg
• Colour: White
  
• Diameter: 1.75mm
• Tollerance: +- 50 Micron
• Spool dimensions: OD = 220mm, ID = 100mm, Width = 80mm
• Recommended printing temperature: +-255 Deg C
• Recommended bed temperature: 65-85 Deg C
• Recommended bed preparation: Hairspray, Gluestick (Pritt, UHU etc.) or Kapton tape
• Note: Cooling fan recommended for PETG at 35% from layer 5